Heat recovery / PFD-15

Indirect air-to-liquid heat recovery

Transfer exhaust heat through a heat exchanger into a separate liquid circuit for a suitable heating duty.

Process flow diagram

PFD-15 ORIGINAL DRAWINGEnlarge drawing ↗
PFD-15: original Ponka process flow diagram for Indirect air-to-liquid heat recovery.
Ponka Engineering Alliance · Custom Air Systems Engineering (2018) Full sheet, p. 17 ↗

Reading the drawing

The exhaust fan sends hot air through the tower, past the heat exchangers and droplet eliminators, and out to atmosphere. In a separate circuit, a pump sends glycol from the tank through the tower exchangers and back; heat crosses the exchanger surfaces without mixing exhaust and glycol. A second pump delivers glycol through a steam exchanger for additional heating, and the glycol return line brings it back to the tank. The cleaning showers serve the exhaust side of the tower.

Mining applications

Recovering usable heat from exhaust

A separate liquid loop provides a way to carry recovered heat from an exhaust source to a useful load. In the brochure arrangement, heat exchangers transfer energy into a glycol circuit. The exhaust and circulating liquid follow separate paths through the heat-transfer equipment.

Preheating a compatible building or process heating loop
Plant exhaust heat-recovery studies with a nearby thermal demand
Seasonal heat reuse assessed alongside Canadian winter operating needs
Typical operating steps for this application
  1. Direct exhaust across the exchanger

    The exhaust fan drives the assessed airstream through the recovery tower.

  2. Circulate the liquid loop

    A pump moves return liquid through the heat exchangers, receiving heat across the exchanger surfaces.

  3. Supply the heating load

    The warmed circuit serves a compatible duty. The source includes a steam exchanger for supplementary heating.

  4. Maintain heat-transfer surfaces

    Cleaning showers, drainage, and droplet elimination address the tower side of the arrangement.

Main components

ComponentRole in the system
Heat-recovery tower ↗Houses the exhaust-side heat exchangers and cleaning provisions.
Exhaust fan ↗Overcomes resistance through the exhaust arrangement.
Liquid circuit and pumpsCarry recovered energy to the selected heating duty.
Droplet eliminators ↗Limit entrained liquid leaving the tower.

Linked components open the VentilationComponents.com supplier catalogue. Equipment selection forms part of the system engineering.

Before equipment selection

What to discuss with Ponka

  • Confirm temperature compatibility and simultaneous availability of exhaust heat and heating demand.
  • Assess exchanger fouling, corrosion, cleaning access, leakage, and added exhaust resistance.
  • Select fluid, freeze protection, expansion provisions, and supplementary heat for the actual circuit.

Related systems

Indirect air-to-liquid heat recovery · PFD-15

Open image at full resolution ↗Enlarged original PFD-15 process flow diagram

Discuss this system with Ponka

Tell us about the material, operating conditions and problem you need to address.

Discuss your project