Variable air volume systems (VAV)

A central air handler supplies several zones. Each zone adjusts the amount of conditioned air it receives as its heating or cooling needs change.

Where it fits

A west-facing office can need cooling late in the afternoon while an interior meeting room sits empty. With variable air volume, each zone can change its supply airflow while sharing a central air handler. This makes the zoning plan important when a floor is divided among new tenants or meeting rooms are added.

  • Multi-zone office floors served by a central duct system
  • Classroom and meeting-room wings with changing occupancy
  • Tenant fit-outs where existing room boundaries and thermostat zones no longer align

How it works

  1. Prepare air centrally

    The air handler mixes ventilation air with return air, conditions it and sends it into the main supply duct.

  2. Adjust airflow at each zone

    A room sensor signals the zone controller. A damper in the terminal box varies airflow within its operating range. Where fitted, a reheat coil warms the air delivered to a zone that needs heat.

  3. Coordinate the fan and terminals

    As dampers open and close, a variable-speed supply fan responds to duct pressure. The outdoor-air controls must still deliver the required ventilation when zones are calling for less supply air.

Planning a project

  • Mark room uses, thermostats and terminal box tags on a floor plan. Note which partitions or occupancies changed.
  • For a comfort complaint, identify the rooms, the time of day and whether adjacent rooms behave differently.
  • Share any air-balance report or controls trends showing supply temperature, duct pressure, zone airflow and damper position.

Related systems

Technical references

Discuss this system with Ponka

Tell us about the building, the spaces it serves and how they are used.

Discuss your project