Pneumatic feed system
Introduce suitable dry powder or granular feed into a pressure conveying line through a controlled airlock feeder.
ExplorePneumatic conveying / PFD-28
Assess an air-driven solids-transfer arrangement with a material-handling fan, cyclone receiver and controlled solids discharge.
Two exhaust branches merge and carry entrained solids through an isolation flap to the material-handling fan. The fan sends the mixture into the cyclone, where separated material falls to the rotary airlock at the base. The drawing shows air leaving the top to atmosphere; additional filtration may be needed for the dust present.
Mining applications
This arrangement transports compatible solids in an airstream and separates material in a cyclone. It is a candidate for selected dry powders or granular materials after checking their behaviour; it is not a general conveying solution for coarse ore.
The pickup arrangement brings a controlled solids stream into the conveying airflow.
A material-handling fan supplies the transport duty shown in the brochure. Fan selection must consider the material passing through it.
The cyclone removes a portion of the conveyed material from the air and directs it to the lower discharge.
A rotary airlock releases the collected solids. The remaining airstream goes to the filtration or outlet treatment selected for its residual dust.
| Component | Role in the system |
|---|---|
| Material-handling fan ↗ | Move the specified air-and-solids stream through the route. |
| Conveying ductwork | Contain the transported material through straight runs and bends. |
| Cyclone receiver | Separate a material fraction from the conveying air. |
| Rotary airlock | Discharge separated solids while limiting air leakage. |
Linked components open the VentilationComponents.com supplier catalogue. Equipment selection forms part of the system engineering.
Before equipment selection
Tell us about the material, operating conditions and problem you need to address.